Safe Life Fire Protection · your area
We build the systemthat stops the fire.
Fire sprinklers, fire alarms, fire suppression systems and more for commercial and industrial facilities across your area. Engineered to NFPA standards and documented for your fire marshal.
The real risk
A system nobody tested is not a system.
Paperwork, not protection
A binder full of tags is not the same as a system that works under load. The hardware gets tested, not just the file.
The deadline nobody tracked
NFPA 25 and 72 intervals stack up monthly, quarterly, semiannually and annually across every system in the building. Miss one and the citation arrives before the inspection does.
Three vendors, one gap
Sprinkler, alarm and backflow contractors each certify their own scope, and none of them owns the seam between them. That seam is where a real fire gets through.
Deficiencies found, never corrected
An inspection that ends in a list is half a job. Findings get corrected, retested and documented for the authority having jurisdiction.
What we design, install and maintain
Every line in the building.
One contractor across every fire protection system, so nothing falls between scopes.
Fire Sprinklers
Reliable, code-compliant fire sprinkler systems. We design, install, and maintain wet, dry, pre-action, and deluge systems to ensure rapid fire suppression.
- Wet pipe
- Dry pipe
- Pre-action
- Deluge
Fire Alarms
Advanced fire alarm systems, including detection, monitoring, and emergency alerts, keeping your facility and occupants safe 24/7.
- Detection
- Notification
- Monitoring
- Programming & service
Fire Suppression Systems
Systems designed to detect and control fires before they spread, minimizing damage and protecting lives. Customized solutions, including sprinklers, gas-based suppression, and foam systems, built to NFPA standards for your industry.
- Clean agent
- Foam
- Hazard-specific design
- Inspection & recharge
Inspection, Testing & Maintenance
Routine fire system inspections, testing, and maintenance for compliance and reliability. Our certified technicians keep your fire protection systems in top working condition.
- Scheduled visits
- Testing to standard
- Deficiency correction
- Documentation
Underground & Utilities
Fire water supply systems, including underground piping, hydrants, and water mains, installed efficiently and to code.
- Underground mains
- Private hydrants
- Fire department connections
- Flushing & hydro testing
Backflow Prevention
Backflow prevention for fire protection water supplies.
- Annual testing
- Forward flow testing
- Repair & rebuild
- Purveyor paperwork
Corrosion Mitigation
Corrosion mitigation for fire protection piping.
- Internal pipe assessment
- Water & MIC testing
- Nitrogen for dry & pre-action
- Venting & drainage
Fire Extinguishers
Fire extinguishers for your facility.
- Selection & placement
- Annual maintenance
- Recharge
- Hydrostatic testing
How the work runs
Assessed, engineered, certified.
Stage 01
Assessment
A specialist walks the building, or reviews your drawings, and surveys every system against current code and your occupancy.
Stage 02
Code review
You hear plainly what complies, what does not, and which NFPA intervals apply to each system you own.
Stage 03
Written proposal
One written scope and one price for the design, the install, or the inspection agreement.
Stage 04
Install & certify
Installation, testing, correction and documentation, with the record in your hands at the end.
Occupancies we work in
Different code for every building.
Occupancy drives the system. A patient tower, a paint line and a data hall are governed by different standards, protected by different hardware and inspected on different clocks.
Healthcare
- Governing standard
- NFPA 99 · 101
- Typical system
- Wet pipe + smoke detection
- Inspection clock
- Quarterly
- Driving hazard
- Occupants who cannot self-evacuate
Hospitality
- Governing standard
- NFPA 13 · 101
- Typical system
- Wet pipe + detection
- Inspection clock
- Quarterly
- Driving hazard
- Sleeping guests, commercial kitchens
Manufacturing
- Governing standard
- NFPA 13 · 30
- Typical system
- Deluge or foam, hazard-rated
- Inspection clock
- Monthly
- Driving hazard
- Flammable liquids, process heat
Oil & gas
- Governing standard
- NFPA 30 · 15
- Typical system
- Foam + water spray
- Inspection clock
- Monthly
- Driving hazard
- Vapor ignition, spill fire
Data centers
- Governing standard
- NFPA 75 · 2001
- Typical system
- Clean agent + pre-action
- Inspection clock
- Quarterly
- Driving hazard
- Water damage to live equipment
Facility management
- Governing standard
- NFPA 25 · 72
- Typical system
- Mixed systems, one calendar
- Inspection clock
- Rolling
- Driving hazard
- Interval drift across many sites
Design & construction
- Governing standard
- NFPA 13 · 241
- Typical system
- Designed to permit set
- Inspection clock
- At turnover
- Driving hazard
- Coordination with AHJ and trades
NFPA 25 or 72 inspection coming due? Every test documented for your fire marshal.
Schedule an inspectionCredentials
Who we answer to.
Standards we work to
Every system is designed, installed and tested to current NFPA standards, with documentation for your fire marshal and insurer.
- Texas Association for Healthcare Facilities Management (TAHFM)
- American Society for Health Care Engineering (ASHE)
Before you call
Straight answers.
Are estimates free?
Yes — the on-site assessment and written estimate are free, with no obligation.
Are you licensed and insured?
Yes. We are fully licensed and insured, and we stand behind every job.
How soon can you come out?
Usually within a few days — call or request online and we will confirm a time that works for you.
Free facility assessment
Find out where you actually stand.
A specialist reviews your systems against current fire code and tells you what passes, what does not, and what it takes to fix it. No obligation.
Or call (817) 586-3800No obligation · Emergency? Call (817) 586-3800
Station 01 · Safe Life Fire Protection
Zone 24 · flow confirmed · system verified